[Avida-SVN] r2301 - in development/tests: . _exp_500u _exp_500u/config
brysonda at myxo.css.msu.edu
brysonda at myxo.css.msu.edu
Tue Feb 5 09:14:25 PST 2008
Author: brysonda
Date: 2008-02-05 12:14:25 -0500 (Tue, 05 Feb 2008)
New Revision: 2301
Added:
development/tests/_exp_500u/
development/tests/_exp_500u/config/
development/tests/_exp_500u/config/avida.cfg
development/tests/_exp_500u/config/environment.cfg
development/tests/_exp_500u/config/events.cfg
development/tests/_exp_500u/config/experimental.org
development/tests/_exp_500u/config/instset-experimental.cfg
development/tests/_exp_500u/test_list
Log:
Add experimental cpu performance test.
Added: development/tests/_exp_500u/config/avida.cfg
===================================================================
--- development/tests/_exp_500u/config/avida.cfg (rev 0)
+++ development/tests/_exp_500u/config/avida.cfg 2008-02-05 17:14:25 UTC (rev 2301)
@@ -0,0 +1,216 @@
+#############################################################################
+# This file includes all the basic run-time defines for Avida.
+# For more information, see doc/config.html
+#############################################################################
+
+VERSION_ID 2.7.0 # Do not change this value.
+
+### GENERAL_GROUP ###
+# General Settings
+ANALYZE_MODE 0 # 0 = Disabled
+ # 1 = Enabled
+ # 2 = Interactive
+VIEW_MODE 1 # Initial viewer screen
+CLONE_FILE - # Clone file to load
+VERBOSITY 1 # Control output verbosity
+
+### ARCH_GROUP ###
+# Architecture Variables
+WORLD_X 60 # Width of the Avida world
+WORLD_Y 60 # Height of the Avida world
+WORLD_GEOMETRY 2 # 1 = Bounded Grid
+ # 2 = Torus
+NUM_DEMES 0 # Number of independed groups in the population; 0=off
+RANDOM_SEED 101 # Random number seed (0 for based on time)
+HARDWARE_TYPE 3 # 0 = Original CPUs
+ # 1 = New SMT CPUs
+ # 2 = Transitional SMT
+
+### CONFIG_FILE_GROUP ###
+# Configuration Files
+DATA_DIR data # Directory in which config files are found
+INST_SET - # File containing instruction set
+EVENT_FILE events.cfg # File containing list of events during run
+ANALYZE_FILE analyze.cfg # File used for analysis mode
+ENVIRONMENT_FILE environment.cfg # File that describes the environment
+START_CREATURE experimental.org # Organism to seed the soup
+
+### REPRODUCTION_GROUP ###
+# Birth and Death
+BIRTH_METHOD 0 # Which organism should be replaced on birth?
+ # 0 = Random organism in neighborhood
+ # 1 = Oldest in neighborhood
+ # 2 = Largest Age/Merit in neighborhood
+ # 3 = None (use only empty cells in neighborhood)
+ # 4 = Random from population (Mass Action)
+ # 5 = Oldest in entire population
+ # 6 = Random within deme
+ # 7 = Organism faced by parent
+ # 8 = Next grid cell (id+1)
+PREFER_EMPTY 1 # Give empty cells preference in offsping placement?
+DEATH_METHOD 2 # 0 = Never die of old age.
+ # 1 = Die when inst executed = AGE_LIMIT (+deviation)
+ # 2 = Die when inst executed = length*AGE_LIMIT (+dev)
+AGE_LIMIT 20 # Modifies DEATH_METHOD
+AGE_DEVIATION 0 # Creates a distribution around AGE_LIMIT
+ALLOC_METHOD 0 # (Orignal CPU Only)
+ # 0 = Allocated space is set to default instruction.
+ # 1 = Set to section of dead genome (Necrophilia)
+ # 2 = Allocated space is set to random instruction.
+DIVIDE_METHOD 1 # 0 = Divide leaves state of mother untouched.
+ # 1 = Divide resets state of mother
+ # (after the divide, we have 2 children)
+ # 2 = Divide resets state of current thread only
+ # (does not touch possible parasite threads)
+GENERATION_INC_METHOD 1 # 0 = Only the generation of the child is
+ # increased on divide.
+ # 1 = Both the generation of the mother and child are
+ # increased on divide (good with DIVIDE_METHOD 1).
+
+### RECOMBINATION_GROUP ###
+# Sexual Recombination and Modularity
+RECOMBINATION_PROB 1.0 # probability of recombination in div-sex
+MAX_BIRTH_WAIT_TIME -1 # Updates incipiant orgs can wait for crossover
+MODULE_NUM 0 # number of modules in the genome
+CONT_REC_REGS 1 # are (modular) recombination regions continuous
+CORESPOND_REC_REGS 1 # are (modular) recombination regions swapped randomly
+ # or with corresponding positions?
+TWO_FOLD_COST_SEX 0 # 1 = only one recombined offspring is born.
+ # 2 = both offspring are born
+SAME_LENGTH_SEX 0 # 0 = recombine with any genome
+ # 1 = only recombine w/ same length
+
+### DIVIDE_GROUP ###
+# Divide Restrictions
+CHILD_SIZE_RANGE 2.0 # Maximal differential between child and parent sizes.
+MIN_COPIED_LINES 0.5 # Code fraction which must be copied before divide.
+MIN_EXE_LINES 0.5 # Code fraction which must be executed before divide.
+REQUIRE_ALLOCATE 1 # (Original CPU Only) Require allocate before divide?
+REQUIRED_TASK -1 # Task ID required for successful divide.
+IMMUNITY_TASK -1 # Task providing immunity from the required task.
+REQUIRED_REACTION -1 # Reaction ID required for successful divide.
+REQUIRED_BONUS 0 # The bonus that an organism must accumulate to divide.
+
+### MUTATION_GROUP ###
+# Mutations
+POINT_MUT_PROB 0.0 # Mutation rate (per-location per update)
+COPY_MUT_PROB 0.0075 # Mutation rate (per copy)
+INS_MUT_PROB 0.0 # Insertion rate (per site, applied on divide)
+DEL_MUT_PROB 0.0 # Deletion rate (per site, applied on divide)
+DIV_MUT_PROB 0.0 # Mutation rate (per site, applied on divide)
+DIVIDE_MUT_PROB 0.0 # Mutation rate (per divide)
+DIVIDE_INS_PROB 0.05 # Insertion rate (per divide)
+DIVIDE_DEL_PROB 0.05 # Deletion rate (per divide)
+PARENT_MUT_PROB 0.0 # Per-site, in parent, on divide
+SPECIAL_MUT_LINE -1 # If this is >= 0, ONLY this line is mutated
+INJECT_INS_PROB 0.0 # Insertion rate (per site, applied on inject)
+INJECT_DEL_PROB 0.0 # Deletion rate (per site, applied on inject)
+INJECT_MUT_PROB 0.0 # Mutation rate (per site, applied on inject)
+
+### REVERSION_GROUP ###
+# Mutation Reversion
+# These slow down avida a lot, and should be set to 0.0 normally.
+REVERT_FATAL 0.0 # Should any mutations be reverted on birth?
+REVERT_DETRIMENTAL 0.0 # 0.0 to 1.0; Probability of reversion.
+REVERT_NEUTRAL 0.0 #
+REVERT_BENEFICIAL 0.0 #
+STERILIZE_FATAL 0.0 # Should any mutations clear (kill) the organism?
+STERILIZE_DETRIMENTAL 0.0 #
+STERILIZE_NEUTRAL 0.0 #
+STERILIZE_BENEFICIAL 0.0 #
+FAIL_IMPLICIT 0 # Should copies that failed *not* due to mutations
+ # be eliminated?
+NEUTRAL_MAX 0.0 # The percent benifical change from parent fitness to be considered neutral.
+NEUTRAL_MIN 0.0 # The percent deleterious change from parent fitness to be considered neutral.
+
+### TIME_GROUP ###
+# Time Slicing
+AVE_TIME_SLICE 30 # Ave number of insts per org per update
+SLICING_METHOD 1 # 0 = CONSTANT: all organisms get default...
+ # 1 = PROBABILISTIC: Run _prob_ proportional to merit.
+ # 2 = INTEGRATED: Perfectly integrated deterministic.
+BASE_MERIT_METHOD 4 # 0 = Constant (merit independent of size)
+ # 1 = Merit proportional to copied size
+ # 2 = Merit prop. to executed size
+ # 3 = Merit prop. to full size
+ # 4 = Merit prop. to min of executed or copied size
+ # 5 = Merit prop. to sqrt of the minimum size
+BASE_CONST_MERIT 100 # Base merit when BASE_MERIT_METHOD set to 0
+DEFAULT_BONUS 1.0 # Initial bonus before any tasks
+MERIT_DEFAULT_BONUS 0 # Scale the merit of an offspring by the default bonus
+ # rather than the accumulated bonus of the parent?
+MAX_CPU_THREADS 1 # Number of Threads a CPU can spawn
+THREAD_SLICING_METHOD 0 # Formula for and organism's thread slicing
+ # (num_threads-1) * THREAD_SLICING_METHOD + 1
+ # 0 = One thread executed per time slice.
+ # 1 = All threads executed each time slice.
+MAX_LABEL_EXE_SIZE 1 # Max nops marked as executed when labels are used
+DONATE_SIZE 5.0 # Amount of merit donated with 'donate' command
+DONATE_MULT 10.0 # Multiple of merit given that the target receives.
+MAX_DONATE_KIN_DIST -1 # Limit on distance of relation for donate; -1=no max
+MAX_DONATE_EDIT_DIST -1 # Limit on edit distance for donate; -1=no max
+MAX_DONATES 1000000 # Limit on number of donates organisms are allowed.
+
+### GENEOLOGY_GROUP ###
+# Geneology
+TRACK_MAIN_LINEAGE 1 # Keep all ancestors of the active population?
+ # 0=no, 1=yes, 2=yes,w/sexual population
+THRESHOLD 3 # Number of organisms in a genotype needed for it
+ # to be considered viable.
+GENOTYPE_PRINT 0 # 0/1 (off/on) Print out all threshold genotypes?
+GENOTYPE_PRINT_DOM 0 # Print out a genotype if it stays dominant for
+ # this many updates. (0 = off)
+SPECIES_THRESHOLD 2 # max failure count for organisms to be same species
+SPECIES_RECORDING 0 # 1 = full, 2 = limited search (parent only)
+SPECIES_PRINT 0 # 0/1 (off/on) Print out all species?
+TEST_CPU_TIME_MOD 20 # Time allocated in test CPUs (multiple of length)
+
+### LOG_GROUP ###
+# Log Files
+LOG_CREATURES 0 # 0/1 (off/on) toggle to print file.
+LOG_GENOTYPES 0 # 0 = off, 1 = print ALL, 2 = print threshold ONLY.
+LOG_THRESHOLD 0 # 0/1 (off/on) toggle to print file.
+LOG_SPECIES 0 # 0/1 (off/on) toggle to print file.
+
+### LINEAGE_GROUP ###
+# Lineage
+# NOTE: This should probably be called "Clade"
+# This one can slow down avida a lot. It is used to get an idea of how
+# often an advantageous mutation arises, and where it goes afterwards.
+# Lineage creation options are. Works only when LOG_LINEAGES is set to 1.
+# 0 = manual creation (on inject, use successive integers as lineage labels).
+# 1 = when a child's (potential) fitness is higher than that of its parent.
+# 2 = when a child's (potential) fitness is higher than max in population.
+# 3 = when a child's (potential) fitness is higher than max in dom. lineage
+# *and* the child is in the dominant lineage, or (2)
+# 4 = when a child's (potential) fitness is higher than max in dom. lineage
+# (and that of its own lineage)
+# 5 = same as child's (potential) fitness is higher than that of the
+# currently dominant organism, and also than that of any organism
+# currently in the same lineage.
+# 6 = when a child's (potential) fitness is higher than any organism
+# currently in the same lineage.
+# 7 = when a child's (potential) fitness is higher than that of any
+# organism in its line of descent
+LOG_LINEAGES 0 #
+LINEAGE_CREATION_METHOD 0 #
+
+### ORGANISM_NETWORK_GROUP ###
+# Organism Network Communication
+NET_ENABLED 0 # Enable Network Communication Support
+NET_DROP_PROB 0.0 # Message drop rate
+NET_MUT_PROB 0.0 # Message corruption probability
+NET_MUT_TYPE 0 # Type of message corruption. 0 = Random Single Bit, 1 = Always Flip Last
+NET_STYLE 0 # Communication Style. 0 = Random Next, 1 = Receiver Facing
+
+### BUY_SELL_GROUP ###
+# Buying and Selling Parameters
+SAVE_RECEIVED 0 # Enable storage of all inputs bought from other orgs
+BUY_PRICE 0 # price offered by organisms attempting to buy
+SELL_PRICE 0 # price offered by organisms attempting to sell
+
+### ANALYZE_GROUP ###
+# Analysis Settings
+MT_CONCURRENCY 1 # Number of concurrent analyze threads
+ANALYZE_OPTION_1 # String variable accessible from analysis scripts
+ANALYZE_OPTION_2 # String variable accessible from analysis scripts
Added: development/tests/_exp_500u/config/environment.cfg
===================================================================
--- development/tests/_exp_500u/config/environment.cfg (rev 0)
+++ development/tests/_exp_500u/config/environment.cfg 2008-02-05 17:14:25 UTC (rev 2301)
@@ -0,0 +1,9 @@
+REACTION NOT not process:value=1.0:type=pow requisite:max_count=1
+REACTION NAND nand process:value=1.0:type=pow requisite:max_count=1
+REACTION AND and process:value=2.0:type=pow requisite:max_count=1
+REACTION ORN orn process:value=2.0:type=pow requisite:max_count=1
+REACTION OR or process:value=3.0:type=pow requisite:max_count=1
+REACTION ANDN andn process:value=3.0:type=pow requisite:max_count=1
+REACTION NOR nor process:value=4.0:type=pow requisite:max_count=1
+REACTION XOR xor process:value=4.0:type=pow requisite:max_count=1
+REACTION EQU equ process:value=5.0:type=pow requisite:max_count=1
Added: development/tests/_exp_500u/config/events.cfg
===================================================================
--- development/tests/_exp_500u/config/events.cfg (rev 0)
+++ development/tests/_exp_500u/config/events.cfg 2008-02-05 17:14:25 UTC (rev 2301)
@@ -0,0 +1,14 @@
+# Print all of the standard data files...
+u 0:10:end PrintAverageData # Save info about they average genotypes
+u 0:10:end PrintDominantData # Save info about most abundant genotypes
+u 0:10:end PrintStatsData # Collect satistics about entire pop.
+u 0:10:end PrintCountData # Count organisms, genotypes, species, etc.
+u 0:10:end PrintTasksData # Save organisms counts for each task.
+u 0:10:end PrintTimeData # Track time conversion (generations, etc.)
+u 0:10:end PrintResourceData # Track resource abundance.
+u 0:50:end PrintDominantGenotype # Save the most abundant genotypes
+u 0:10:end PrintTasksExeData # Num. times tasks have been executed.
+u 0:10:end PrintTasksQualData # Task quality information
+
+# Setup the exit time and full population data collection.
+u 500 exit # exit
Added: development/tests/_exp_500u/config/experimental.org
===================================================================
--- development/tests/_exp_500u/config/experimental.org (rev 0)
+++ development/tests/_exp_500u/config/experimental.org 2008-02-05 17:14:25 UTC (rev 2301)
@@ -0,0 +1,100 @@
+h-alloc # Allocate space for child
+h-search # Locate the end of the organism
+nop-D #
+nop-A #
+mov-head # Place write-head at beginning of offspring.
+nop-C #
+add
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+nop-C #
+h-search # Mark the beginning of the copy loop
+h-copy # Do the copy
+if-label # If we're done copying....
+nop-D #
+nop-A #
+h-divide # ...divide!
+mov-head # Otherwise, loop back to the beginning of the copy loop.
+nop-A #
+add # neutral separator (terminates mov-head)
+label
+nop-A # End Label
+nop-B #
Added: development/tests/_exp_500u/config/instset-experimental.cfg
===================================================================
--- development/tests/_exp_500u/config/instset-experimental.cfg (rev 0)
+++ development/tests/_exp_500u/config/instset-experimental.cfg 2008-02-05 17:14:25 UTC (rev 2301)
@@ -0,0 +1,56 @@
+nop-A 1 # a
+nop-B 1 # b
+nop-C 1 # c
+nop-D 1 # d
+if-n-equ 1 # e
+if-less 1 # f
+pop 1 # g
+push 1 # h
+swap-stk 1 # i
+swap 1 # j
+shift-r 1 # k
+shift-l 1 # l
+inc 1 # m
+dec 1 # n
+add 1 # o
+sub 1 # p
+nand 1 # q
+IO 1 # r Puts current contents of register and gets new.
+h-alloc 1 # s Allocate as much memory as organism can use.
+h-divide 1 # t Cuts off everything between the read and write heads
+h-copy 1 # u Combine h-read and h-write
+h-search 1 # v Search for matching template, set flow head & return info
+ # # if no template, move flow-head here, set size&offset=0.
+mov-head 1 # w Move ?IP? head to flow control.
+jmp-head 1 # x Move ?IP? head by fixed amount in CX. Set old pos in CX.
+get-head 1 # y Get position of specified head in CX.
+if-label 1 # z
+label 1 # A delineate labeled regions of the genome
+#goto 1 # B Move IP to the labeled position in the genome
+
+#set-flow 1 # C Move flow-head to address in ?CX?
+
+#adv-head 1
+#jump-f 1
+#jump-b 1
+#call 1
+#return 1
+#if-bit-1 1
+#get 1
+#put 1
+#h-read 1
+#h-write 1
+#set-head 1
+#search-f 1
+#search-b 1
+
+
+# Works on multiple nops: pop push inc dec IO adv-head
+
+# What if we add a new head. Search will return the location of something,
+# and put the new head there. Then set-head will move another head to that
+# point. In the case of the copy loop, it only needs to be set once and
+# this will speed up the code quite a bit!
+
+# Search with no template returns current position (abs line number) in
+# genome.
\ No newline at end of file
Added: development/tests/_exp_500u/test_list
===================================================================
--- development/tests/_exp_500u/test_list (rev 0)
+++ development/tests/_exp_500u/test_list 2008-02-05 17:14:25 UTC (rev 2301)
@@ -0,0 +1,36 @@
+;--- Begin Test Configuration File (test_list) ---
+[main]
+; Command line arguments to pass to the application
+args =
+app = %(default_app)s
+nonzeroexit = disallow ; Exit code handling (disallow, allow, or require)
+ ; disallow - treat non-zero exit codes as failures
+ ; allow - all exit codes are acceptable
+ ; require - treat zero exit codes as failures, useful
+ ; for creating tests for app error checking
+createdby = David Bryson ; Who created the test
+email = brysonda at egr.msu.edu ; Email address for the test's creator
+
+[consistency]
+enabled = no ; Is this test a consistency test?
+long = yes ; Is this test a long test?
+
+[performance]
+enabled = yes ; Is this test a performance test?
+long = yes ; Is this test a long test?
+
+; The following variables can be used in constructing setting values by calling
+; them with %(variable_name)s. For example see 'app' above.
+;
+; app
+; builddir
+; cpus
+; mode
+; perf_repeat
+; perf_user_margin
+; perf_wall_margin
+; svn
+; svnmetadir
+; svnversion
+; testdir
+;--- End Test Configuration File ---
More information about the Avida-cvs
mailing list